Clear, water-based, 2-component polyurethane topcoat for use on wood (inside), concrete and pre-painted surfaces, also serves as an anti-graffiti coating.

Single pack solvent-free anti-graffiti protection for many indoor and outdoor substrates.

Sacrificial layer based on natural wax. Suitable for a single cleaning process.

Two-pack water based anti-slip floor coating for indoor and outdoor application.

Easy to apply solvent based Alkyd anti-slip floor coating specially designed for applying on old (>2 years), dry concrete for interior and exterior use. The coating has a good resistance against abrasion and neutral detergents (no alkaline cleaning agents) and is resistance during short contact periods against lubricating oils, fuel, petrol etc.

This topcoat makes every surface Non-skid in a second. SuperGrip™ Anti-Slip sprays are based on a fast drying acrylic modified short oil alkyd. The coloured products are based on lead- and chromate free pigments and contain a special anti-slip additive. Should be applied on metal, concrete, ceramic and wood surfaces or properly prepared painted substrates.

A one component high quality bitumen based coating with fillers and special flow additives. For refurbishing car parks, driveways and footpaths.

Speed Patch Pourable is an easy to mix pourable material for quick repairs to level concrete, inside or outside. NOTE: This product is only available in the UK.

Very strong epoxy repair mortar for repairing damaged floors and steps.

Water-based single pack hygienic topcoat protects against discontinuous steam or water vapour formation, in order to prevent condensation and dripping.

Water-based epoxy primer for use on smooth floors, like power-floated concrete and tiles.

Gas and vapour tight abrasion resistant rubberlike coating for walls and ceilings in e.g. cold stores.

Durable line marking paint, based on a fast drying short oil alkyd, for drawing lines in parking areas, plants, warehouses, sports fields, stadiums and all sites where traffic control is required.

For quick and easy marking of construction and excavation sites, underground utilities and for traffic safety. Otimised for ground marking. By means of the 360° valve the aerosol is sprayable in all directions. RUST-OLEUM® Spot Marking Aerosol 2800 is based on a fast drying acrylic resin. All products in this range are aromatic free and based on lead- and chromate free pigments.

For quick and easy marking of construction and excavation sites, underground utilities and for traffic safety.

Single pack high performance anti-corrosion topcoat based on a urethane modified alkyd. Ideal for low temperatures (as low as 5°C). The same protection in less layers than other alkyd-systems.

Fast drying, zinc rich primer based on an epoxy ester resin. Contains pure zinc as pigment and provides cathodic protection to metal.

Two-pack, high layer thickness glossy epoxy, resistant to corrosion and chemicals, suitable for applications on metal or floors. Available wit 2 activators: 9101 HS high solids, 9101 WG low temperatures.

Water based quick drying primer for use on all metal substrates including bare or blasted steel, galvanized metal and plastisol®.

Single pack super adhesion primer for PVDF or PVF2, galvanised steel, zinc and aluminum.

Single pack water-based elastic coating, optimized for brush or roller application.

Single pack super adhesion primer for galvanised steel, plastic or other smooth surfaces.

RUST-OLEUM® CombiPrimer Tack Coat 3302 is an adhesion coat based on a solvent containing acrylic.

RUST-OLEUM® CombiColor Aerosol Tack Coat 3302 is an adhesion coat based on a solvent containing acrylic.

Instantly waterproof elastic paint for roofs, non-walkable terraces, gutters, ridge-pieces, chimney stacks, pipes, etc. The product has better UV resistance and improved hydrophobic properties.

Rapid drying roof tile paint for fiber cement (Eternit®) tiles.

Watertight water-based liquid membrane for roofs. Forms a lasting elastic coat without joint or seams on sloping roofs.

High build, solvent-free epoxy floor paint for garages, warehouses, showrooms, corridors, indoor car parks, workshops etc.

An elastic, crack bridging and waterproofing façade coating. The microporous structure ensures that the base is constantly able to breathe. Ready for use and simple to apply on any façade. In other words: Façade protection with waterproof guarantees.

Water-based single pack hygienic paint protects against normal humidity and contamination indoors. Suitable for walls and ceilings.

Clear, water-based, 2-component polyurethane topcoat for use on wood (inside), concrete and pre-painted surfaces, also serves as an anti-graffiti coating.

Rust-Oleum® CombiColor® Multi-Surface 7300 coating is a solvent based primer and topcoat in one, based on a modified Alkyd binder, providing good adhesion to many types of substrates. The product is lead- and chromate free.

Hard-wearing, easy to apply single pack floor coating with PU addition.